Table of Contents
Advertisement
Creating a project for an automatic switch
sequence
To initiate an automatic switch sequence, a project must be created or opened.
A project can be created with or without a label list:
1
Touch Manage Project in order to open or create a project.
Managing the test through a project will allow the switching sequence to run auto-
matically.
2
Enter a Project Name.
A project directory will be created, and all measurement files will automatically be
stored in this dedicated directory.
Figure 54
Project created
3
If the fibers do not have labels, just fill the project name, number of fibers and
start fiber number.: see
Or
If a Label list should be used, set "Label list" to Yes and browse by clicking on the
"selected label list" section. There is an example .csv label list stored in the
Project directory.
Creating a project for an automatic switch sequence
Figure
54.
User Manual
700MAN203 Rev. 007
Chapter 7 High Fiber Count
83
Advertisement
Table of Contents
