Table of Contents
Advertisement
S
S
UPER
ERVER 6024H-32R/6024H-32 User's Manual
5-6
Installing Memory
CAUTION! Exercise extreme care when installing or removing
!
DIMM modules to prevent any possible damage.
Memory support
The X6DH3-G2 supports up to 16 GB of registered ECC DDR2-400 SDRAM. The
memory scheme is interleaved so you must install two memory modules at a time,
beginning with Bank 1, then Bank 2, and so on. You should use DIMMs of the same
size, type and speed. Please refer to Supermicro's web site at www.supermicro.
com for memory updates.
Installing memory modules
1. When adding DIMMs, you must start by populating Bank 1. The memory scheme
is interleaved so you must install two modules at a time, beginning with Bank 1,
then Bank 2, and so on.
2. Insert each DIMM module vertically into its slot. Pay attention to the notch
along the bottom of the module to prevent inserting the DIMM module incorrectly.
See Figure 5-4.
3. Gently press down on the DIMM module until it snaps into place in the slot.
Repeat for all modules (see step 1 above).
5-8
Advertisement
Table of Contents
