Supero SuperServer 6024H-32 User Manual page 14

Supermicro superserver 6024h-32 servers: user guide
Table of Contents

Advertisement

S
S
UPER
ERVER 6024H-32R/6024H-32 User's Manual
SAS/SATA Subsystem
The SAS/SATA subsystem supports up to six SAS/SATA drives. The SAS/SATA
drives are hot-swappable units and are connected to a backplane that provides
power and control.
Note: The operating system you use must have RAID support to enable the hot-
swap capability of the SATA drives.
Front Control Panel
The SuperServer 6024H-32R/6024H-32's control panel provides you with system
monitoring and control. LEDs indicate system power, HDD activity, network activity,
overheat/fan fail and (6024H-32R only) power supply failure. A main power button
and a system reset button are also included.
I/O Backplane
The SC823T-R500LP/SC823T-550LP is an ATX form factor chassis that is designed
to be used in a 2U rackmount confi guration. The I/O backplane provides seven low-
profi le motherboard expansion slots, one COM port, a parallel port, a VGA port, two
USB 2.0 ports, PS/2 mouse and keyboard ports and two gigabit Ethernet ports.
Cooling System
The SC823T-R500LP/SC823T-550LP chassis has an innovative cooling design
that includes four 8-cm hot-plug system cooling fans located in the middle section
of the chassis. An air shroud channels the air fl ow from these fans to effi ciently
cool the processor area of the system. The power supply module(s) also includes
a cooling fan.
1-4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Superserver 6024h-32r

Table of Contents