Table of Contents
Advertisement
Adding a Bootable Array
1. From the Main menu, select Manage Arrays.
2. From the List of Arrays, select the array you want to make bootable, and press
Ctrl+B.
3. Enter Y to create a bootable array when the following message is displayed: "This
will make all other existing bootable array non-bootable. Do you want to make this
array bootable? (Yes/No):" A bootable array will then be created. An asterisk will
appear next to the bootable array (as shown in the picture below:)
Deleting a Bootable Array
1. From the Main menu, select Manage Arrays.
2. From the List of Arrays, select the bootable array you want to delete, and press
Ctrl+B. (A bootable array is an array marked with an asterisk, as shown in the pic-
ture above.)
3. Enter Y to delete a bootable array when the following message is displayed: "The
array is already marked bootable. Do you want to make this array as not bootable?
(Yes/No):" The bootable array will then be deleted and the asterisk will disappear.
Note: do not use the delete key to delete a bootable array.
Appendix B: Software Installation
B-11
Advertisement
Table of Contents
