Appendix B: Software Installation
3. For RAID 0, select the desired stripe size. Available stripe sizes are 16, 32, and
(the default) 64 KB. It is recommended that you do not change the default setting.
4. The item: "Create RAID via" allows you to select between the different creating
methods for RAID 0 and RAID 1.
The following table gives examples of when each is appropriate.
Note: If you select Migrate for RAID 0 or Build for RAID 1, you will be asked to
select the source drive. The contents of the source drive will be preserved, how-
ever, the data on the new drive will be lost.
5. When you are fi nished, press Done (as tshown on the screen below).
B-9