Table of Contents
Advertisement
S
S
UPER
ERVER 6024H-32R/6024H-32 User's Manual
1-2
Serverboard Features
At the heart of the SuperServer 6024H-32R/6024H-32 lies the X6DH3-G2, a dual
processor serverboard based on the Intel E7520 chipset and designed to provide
maximum performance. Below are the main features of the X6DH3-G2. (See Figure
1-1 for a block diagram of the E7520 chipset).
Processors
The X6DH3-G2 supports single or Intel dual Xeon EM64T type processors at
a front side (system) bus speed of 800 MHz. Please refer to the serverboard
description pages on our web site for a complete listing of supported processors
(www.supermicro.com).
Memory
The X6DH3-G2 has eight 240-pin DIMM slots that can support up to 16 GB of
dual channel, registered ECC DDR2-400 SDRAM. The memory is an interleaved
confi guration, which requires modules of the same size and speed to be installed
in pairs.
Serial ATA
The 6300ESB portion of the E7520 chipset includes a SATA Host controller that
provides a two-port Serial ATA subsystem. In addition, an Adaptec AIC-9410W
controller integrated onboard supports eight SAS or SATA drives, which are RAID
0, 1 and JBOD supported. The SAS drives are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the SAS drives.
PCI Expansion Slots
The X6DH3-G2 has six PCI expansion slots, which includes two x8 PCI-Express
slots, one 64-bit 133 MHz PCI-X slot, two 64-bit 100 MHz PCI-X slots and one 32-bit
33 MHz PCI slot. (One 100 MHz PCI slot supports Zero Channel RAID.)
1-2
Advertisement
Table of Contents
