Table of Contents
Advertisement
Appendix B: Software Installation
Setting Controller Confi guration:
3. Select "Controller Confi guration" and press <Enter> to access the submen as
shown below.
4. Use the arrow keys to select an item. Then press <Enter> and the arrow keys to
confi gure the setting for the item selected.
5. To load the default settings, press <F6>.
Note: The default setting for each item is listed below:
Runtime BIOS: Enabled
BBS Support: Device
POST Banner Display: Enabled
CTRL-A Message Display: Enabled
Physical Drives Display during POST: Enabled
6. Press <Esc> to return to the previous menu and to exit the utility.
B-23
Advertisement
Table of Contents
