Table of Contents
Advertisement
S
S
UPER
ERVER 6024H-32R/6024H-32 User's Manual
Figure 5-3. CPU Socket: Empty and with Processor Installed
Warning!
stalling the CPU. If the lever is only partly raised, damage to the
!
socket or CPU may result.
Empty socket
Lever
Triangle (pin 1)
Installing the Heatsink
1. Do not apply any thermal grease to the
heatsink or the CPU die. The required
amount has already been applied.
2. Place the heatsink on top of the CPU so
that the four mounting holes are aligned with
those on the retention mechanism.
3. Screw in two diagonal screws (e.g. the
#1 and the #2 screws) until just snug; do
not fully tighten the screws, which may
damage the CPU.
4. Finish the installation by fully tightening
all four screws.
Make sure you lift the lever completely when in-
Triangles indicating pin 1 location
5-6
With processor installed
CEK Passive Heatsink
Screw#1
Screw#2
Screw#1
Screw#2
Advertisement
Table of Contents
