Table of Contents
Advertisement
SuperServer 2027TR-D70RF(+) USER'S MANUAL
1-2
Serverboard Features
T h e
2 0 2 7 T R - D 7 0 R F
2027TR-D70RF+ uses the X9DRT-HF+ serverboard which accomodates
m o r e m e m o r y. T h e y a r e d u a l p r o c e s s o r b o a r d s b a s e d o n t h e
Intel C602 chipset and designed to provide maximum performance. Two
serverboards can be mounted in independent computing nodes in the
SC217HD-R1K28MB chassis.
The sections below cover the main features of the serverboards (see Figure 1-1
for a block diagram).
Processors
The serverboard supports single or dual Intel Xeon E5-2600 and E5-2600 v2 family
processors (Dual Socket R (LGA 2011)). Please refer to the serverboard description
pages on our web site for a complete listing of supported processors
supermicro.com).
Memory
•
The X9DRT-HF has 8 DIMM slots supporting up to 512GB of LRDIMM and
256GB of RDIMM.
•
The X9DRT-HF+ has 16 DIMM slots supporting up to 1TB of LRDIMM, 512GB
of RDIMM, or 128GB ECC/non-ECC UDIMM.
Supported memory type is DDR3 1866/1600/1333/1066/800MHz speed registered
ECC SDRAM in up to 32GB, 16GB, 8GB, 4GB, 2GB, 1GB. The X9DRT-HF+ also
supports 64GB LRDIMM. See Chapter 5 for details.
Note: Check the Supermicro website (www.supermicro.com) for the latest memory
support information.
SAS/SATA
An LSI
SAS2008 SAS2 controller is integrated into the installed BPN-ADP-E16-L
®
adapter cards to provide a twelve port 6 Gb/s SAS2 (Serial Attached SCSI) /SATA3
subsystem for each node. The system has either RAID 0, 1 and 10 support for the
SuperServer 2027TR-D70RF(+) server. The SAS/SATA drives are hot-swappable
units.
Note: The operating system you use must have RAID support to enable the
hotswap capability and RAID function of the SAS/SATA drives.
u s e s
t h e
X 9 D R T - H F
1-2
s e r v e r b o a r d ;
t h e
(www.
Advertisement
Table of Contents
