Spo2 Alarms Setting - Progetti Rescue Life 9 Instructions For Use Manual

3 – ACQUISITION OF BIOMEDICAL PARAMETERS

3.2.2. SPO2 ALARMS SETTING

The SpO alarm can be set to warn if the SpO
2
lower than the inferior limits, an alarm tone alerts the user.
SpO2 alarms can be enabled/disabled/reset pressing on "ALARMS SET" button.
1. Press "ALARMS SET" and will be opened the list of alarms: "ECG HR alarm", "SpO2 alarm", "EtCO2 alarm",
"TEMP alarm", "ALL OFF";
2. Rotate the KNOB to select "SpO2 alarm";
3. Press the KNOB to confirm "SpO2 alarm";
4. Rotate the KNOB to select the parameter to change between "MIN" and "ON/OFF";
9
Rescue Life – Instruction For Use
value goes outside of the set inferior limit. If the SPO
2
3-18
Rev.0.5 – 30/03/2022
value is
2