DEFIBRILLATION ELECTRODES CONNECTION
1. Insert the connector into "SHOCK PADS" port;
2. Lock the connector by clockwise rotation until a «CLACK» sound is audible. To unlock the connector,
pull the button the connector and do counterclockwise rotation;
3. Verify if "PADS" appears on the display, up to the left side.
2.1.6.1 "MANUAL" MODE (default mode)
DEFIBRILLATION PROCEDURE IN "MANUAL" MODE
1.
POWER ON
Switch on the device pressing ON/OFF BUTTON [1];
MANUAL mode is already set as default.
9
Rescue Life
– Instruction For Use
2 - THERAPY
2-5
Rev.0.5 – 30/03/2022