Connecting To Power - Progetti Rescue Life 9 Instructions For Use Manual

1.9 CONNECTING TO POWER

9
The Rescue Life can be supplied by:
•
AC line (100-240 V
•
Li-Ion battery (15 V
AC LINE ALIMENTATION
The connection of Rescue Life
1. Insert the AC POWER CABLE's female pole into AC POWER port;
2. Connect the AC POWER CABLE's male pole to an AC line port (100-240 VAC | 50-60 Hz). The AC
POWER LED will light itself in blue and "AC" is on the display.
AC POWER LED status
Rescue Life
1 - INTRODUCTION
| 50-60 Hz);
AC
| 3200 mAh).
DC
9
to AC line can be done according to the following instructions:
state A
state B
9
– Instruction For Use
When the blue AC POWER LED is ON, it
informs that the defibrillator is connected to
AC line.
When the blue AC POWER LED is OFF, it
means that the defibrillator is not connected
to AC line.
1-32
Rev.0.5 – 30/03/2022
DESCRIPTION