Table of Contents
Advertisement
9
Rescue Life
– Instruction For Use
Rev.0.5 – 30/03/2022
3 – ACQUISITION OF BIOMEDICAL PARAMETERS
3.4.2 TEMP ALARM SETTING
The TEMP alarm can be set to warn if the TEMP value goes outside of the set inferior limit and superior
limit. If the TEMP value is lower than inferior limit or higher than superior limit, then an alarm tone alerts
the user.
TEMP alarm can be enabled/disabled/reset pressing on "ALARMS SET" button.
1. Press "ALARMS SET" and will be opened the list of alarms: "ECG HR alarm", "SpO2 alarm", "EtCO2
alarm", "TEMP alarm", "ALL OFF";
2. Rotate the KNOB to select "TEMP alarm";
3. Press the KNOB to confirm "TEMP alarm";
4. Rotate the KNOB to select the parameter to change between "MIN", "MAX" and "ON/OFF";
3-30
Advertisement
Table of Contents
