Table of Contents
Advertisement
3 – ACQUISITION OF BIOMEDICAL PARAMETERS
3.3.1 PROCEDURE
Insert EtCO
ADAPTER's connector in EtCO
1.
2
9
Rescue Life
– Instruction For Use
CAUTION – Do not pull or bend the CO
feet run over the cable. Failure to follow these instructions may cause
cable discontinuity, short circuit, skin burn on the patient form the sensor
temperature increase due to the short circuit of the cable and
measurement cannot be performed. If the CO
with a new one.
CAUTION – This CO
sensor kit is calibrated by taking the expired gas to
2
be 37°C temperature and 100% humidity. Measured data varies about -
0.4%/°C.
CAUTION – Keep magnetic objects away from the CO
magnetic objects may cause an incorrect waveform and measurement
value to be displayed.
CAUTION – The measured value may be incorrect when the operating
temperature changes greatly.
PORT
2
3-21
Rev.0.5 – 30/03/2022
sensor cable, and do not let caster
2
sensor is broken, replace it
2
2
sensor. The
Advertisement
Table of Contents
