Table of Contents
Advertisement
S
S
UPER
ERVER 5013G-M Manual
USB Wake-Up
Use JPUSB to enable or disable
USB Wake-Up, which allows you
to wakeup the system by de-
pressing a key on the keyboard or
by clicking the mouse when either
is connected to the USB0 or USB1
port. This jumper is used together
with the USB Wake-Up function in
BIOS. Enable both the jumper and
the BIOS setting to allow the sys-
tem to be woken up. See the table
on the right for jumper settings.
Watch Dog Enable/Disable
JP2 enables and disables the
Watch Dog function.
is a system monitor that will re-
start the system if a software ap-
plication freezes operations.
jumper is used together with the
Watch Dog enable function in
BIOS. Enable both the jumper and
the BIOS setting to use the Watch
Dog feature. See the table on the
right for jumper settings.
Front Side Bus Speed
JP1 is used to set the system
(front side) bus speed for the pro-
cessors.
It is best to keep this
jumper set to Auto. This jumper is
used together with the CPU Clock
setting in BIOS. See the table on
the right for jumper settings.
Watch Dog
This
5-18
USB Wake-Up
Jumper Settings
(JPUSB)
Jumper
Position
Definition
1-2
Disabled
2-3
Enabled
Watch Dog Enable
Jumper Settings (JP2)
Jumper
Position
Definition
Open
Disabled
Closed
Enabled
Front Side Bus Speed
Jumper Settings (JP1)
Jum per
Position
Definition
Pins 1-2
Auto
Pins 2-3
400 MHz
Open
533 Mhz
Advertisement
Table of Contents
