Table of Contents
Advertisement
5-6
Installing Memory
CAUTION! Exercise extreme care when install-
ing or removing DIMM modules to prevent any
!
possible damage.
1.
Memory support
The P4SGE has three DIMM slots that support both double-sided and
single-sided non-ECC unbuffered DDR-333/266/200 (PC2700/2100/1600)
SDRAM modules for a maximum of 2 GB main memory.
2.
Installing memory modules
Insert each memory module vertically into a DIMM slot. Pay attention to
the notch along the bottom of the module to prevent inserting it incor-
rectly. Gently press down on the DIMM module until it snaps into place in
the slot (see Figure 5-5).
To Install: Insert module vertically and press down until it snaps into
place. Pay attention to the bottom notch.
To Remove: Use your thumbs to gently push each release tab outward
to free the DIMM from the slot.
Chapter 5: Advanced Motherboard Setup
Figure 5-5.
DIMM Installation
5-7
Advertisement
Table of Contents
