Table of Contents
Advertisement
About This Manual
This manual is written for professional system integrators and PC techni-
cians.
It provides information for the installation and use of the Super-
Server 5013G-M.
experienced technicians only.
The SuperServer 5013G-M is an ultra compact single processor 1U
rackmount server based on the SC512 1U rackmount server chassis and
the P4SGE mainboard. The P4SGE mainboard supports single Intel
®
Pentium
4 processors with a 512KB integrated Advanced Transfer Cache
or single Intel
Transfer Cache.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with
the server system and describes the main features of the Super P4SGE
mainboard and the SC512 chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer
5013G-M into a rack and check out the server configuration prior to power-
ing up the system.
memory components, this chapter will refer you to the appropriate sections
of the manual for their installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the
functions and information provided by the control panel on the chassis as
well as other LEDs located throughout the system.
Preface
Installation and maintainance should be performed by
®
®
Celeron
processors with a 128KB integrated Advanced
If your server was ordered without the processor and
iii
Preface
®
Advertisement
Table of Contents
