Usb Wake-Up; Watch Dog Enable/Disable; Speaker Jumper - Supero SUPER SERVER 5013C-MT User Manual

S S
UPER ERVER 5013C-MT User's Manual

USB Wake-Up

Use JPUSB1 to enable or disable
USB Wake-Up, which allows you
to wakeup the system by de-
pressing a key on the keyboard or
by clicking the mouse when either
is connected to the USB1 or USB2
port. Enable the jumper to allow
the system to be woken up from
an S1 or S3 state in Windows OS.
See the table on the right for
jumper settings.
works with the USB1 and USB2
ports only.

Watch Dog Enable/Disable

JP8 enables controls the Watch
Dog function, a system monitor
that takes action when a software
application freezes the system.
Pins 1-2 will have WD reset the
system if a program freezes. Pins
2-3 will generate a non-maskable
interrupt for the program that has
frozen. See the table on the right
for jumper settings.
must also be enabled in BIOS.

Speaker Jumper

The speaker jumper is located on
J18 and allows you to choose be-
tween using the internal or exter-
nal speakers.
speaker, jump pins 3 and 4.
use an external speaker, place the
speaker cable's header on all four
pins See the table on the right.
This feature
Watch Dog
For the internal
To
5-18
USB Wake-Up
Jumper Settings
(JPUSB1)
Jumper
Position
1-2
2-3
Watch Dog
Jumper Settings (JP8)
Jumper
Position
Pins 1-2 WD to Reset
Pins 2-3 WD to NMI
Open
Note: when Watch Dog is enabled, the user must
write their own application software to disable
the Watch Dog Timer.
Speaker
Jumper Settings (J18)
Pins
1 through 4 External Spkr
3 and 4 Internal Spkr
Definition
Disabled
Enabled
Definition
Disabled
Definition