Table of Contents
Advertisement
5-5
Installing Processors
Avoid placing direct pressure to the top of the processor
package.
!
removing or changing any hardware components.
Processor Support
The P4SGE has one 478-pin microPGA socket, which supports Intel Pentium
4 processors of up to 3.06 GHz with a 512KB integrated Advanced Trans-
fer Cache or single Intel Celeron processors of up to 2.20 GHz with a
128KB integrated Advanced Transfer Cache
1. Lift the lever on the CPU socket.
2. Install the CPU in the socket. Make
sure that Pin 1 of the CPU is seated on
Pin 1 of the socket (both corners are
marked with a triangle).
3. Press the lever down until you hear
it *click* into the locked position.
4. Apply the proper amount of thermal
compound to the CPU die. Place the
heatsink on top of the CPU and press
firmly downward - do not
the heatsink to seat the thermal com-
pound.
5. Secure the heat sink by locking the
retention clips into their proper position.
Chapter 5: Advanced Motherboard Setup
Always remove the power cord first before adding,
twist or slide
5-5
Advertisement
Table of Contents
