Table of Contents
Advertisement
Chapter 7: BIOS
Resources Controlled By
This setting allows BIOS to automatically configure all boot and Plug and
Play compatible devices. If you choose Auto, you cannot select the IRQ,
DMA and memory base address fields, because BIOS automatically assigns
them. The options are "Auto <ESCD>" and "Manual".
PCI/VGA Palette Snoop
For best system performance, this item has been pre-set to "Disabled" by
the manufacturer. The settings are "Enabled" and "Disabled".
Assign IRQ for VGA
This setting allows you to assign an IRQ (Interrupt Request) for the VGA.
The settings are "Enabled" and "Disabled".
IDE DMA Transfer Access
This setting is to allow access to UDMA when running in DOS mode. The
settings are "Enabled" and "Disabled".
7-19
Advertisement
Table of Contents
