About This Manual; Manual Organization - Supero 4042G-72RF4 User Manual

A+ server
Table of Contents

Advertisement

About This Manual

This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the A+ Server 4042G-72RF4.
Installation and maintenance should be performed by experienced technicians only.
The A+ Server 4042G-72RF4 is a high-end server based on the SC748TQ-R1K43B
chassis and the H8QG7-LN4F, a high-end serverboard which is based on the
AMD® SR5690/SR5670/SP5100 chipset and supports four AMD Socket G34 type
processors with up to 1 TB of DDR3-1600/1333/1066 Mhz Registered ECC SDRAM
or 256 GB of Unbuffered ECC/non-ECC SDRAM in thirty-two (32) DIMMs.

Manual Organization

Chapter 1: Introduction
The first chapter provides a checklist of the main components included with the
server system and describes the main features of the H8QG7-LN4F serverboard
and the SC748TQ-R1K43B chassis, which comprise the A+ Server 4042G-72RF4.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the A+ Server 4042G-72RF4
into a rack and check out the server configuration prior to powering up the system.
If your server was ordered without processor and memory components, this chapter
will refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: Warning Statements for AC Systems
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
A+ Server 4042G-72RF4.
Chapter 5: Advanced Serverboard Setup
Chapter 5 provides detailed information on the H8QG7-LN4F serverboard,
including the locations and functions of connections, headers and jumpers. Refer
to this chapter when adding or removing processors or main memory and when
reconfiguring the serverboard.
Preface
iii
Preface

Advertisement

Table of Contents
loading

Table of Contents