Table of Contents
Advertisement
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 1027R-73DARF.
Installation and maintainance should be performed by experienced technicians only.
The SuperServer 1027R-73DARF is a high-end server based on the SC113TQ-
R700CB 1U rackmountable chassis and the X9DRD-7LN4F dual processor
serverboard.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with the
server system and describes the main features of the X9DRD-7LN4F serverboard
and the SC113TQ-R700CB chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 1027R-
73DARF into a rack and check out the server configuration prior to powering up the
system. If your server was ordered without processor and memory components, this
chapter will refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: System Safety
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperServer 1027R-73DARF.
Preface
iii
Preface
Advertisement
Table of Contents
