Table of Contents
Advertisement
3-20 Windows Setup and Operation
Disk 4
Disk 5
IMPORTANT:
Hard disks are numbered from "0" at the OS startup according to the position they are
inserted. When you increase a hard disk while the system is running, it will be given a
number that is not used for any disks. However when you restart the system, the old disk
numbers will not be retained and disks are re-numbered according to the hard disk
position. Therefore, you need to determine which disks are mirrored based on target IDs,
which are always fixed, but not on disk numbers because disk numbers may change.
11.
Make a mirror setting of Disks 1 and 4.
Right-click volume (E) on the Disk 4
and select [Add Mirror].
Advertisement
Table of Contents
Troubleshooting
