NEC Express5800/320Fa-L User Manual page 275

Procedure in Server Maintenance Utility
1.
Save the image data of the update firmware in a desired directory of the server.
Write down the path to the directory in which the image data is saved.
2.
Select the target component with the Server Maintenance Utility.
3.
Check the current state of the target component with the LEDs. If the component is operating,
stop the component. Stop the CPU module and then stop the PCI module.
4.
Click the [Firmware...] button for the target component.
Sample screen of Server Maintenance Utility
5.
Select [Specify new firmware for update],
enter the directory where the firmware to
update is stored (the directory you wrote down
in step 1) and the file name of the image data
into the input box, and click the [Execute]
button.
The server will update the firmware.
6.
Check the update result with the event log.
Installing and Using Utilities 5-75
[CPU Module]