Table of Contents
Advertisement
Procedure in the Server Maintenance Utility
1.
Select the target module by using the Server Maintenance Utility.
2.
Check the current state of the target module with the LEDs. If the component is operating,
stop the component.
3.
Click the [Diagnostics] button in the [Diagnostics Information] on the target module.
The diagnostics result can be confirmed by re-obtaining the status of the target module. The
result of the diagnostics is registered in the event log.
CHECK:
When stopping IO module, check that the status of Ethernet is "Duplex" on Server Maintenance
Utility. Do not stop the IO module especially when LAN is connected only to the IO module on
that side.
Sample screen of Server Maintenance Utility
Installing and Using Utilities 5-71
[PCI Module]
Advertisement
Table of Contents
Troubleshooting
