NEC Express5800/320Fa-L User Manual page 230

5-30 Installing and Using Utilities
CPU Information
In [CPU Information] of Data Viewer's system tree, the external clock is listed as "Unknown."
When [ft] Tree Appears on Date Viewer in an Incorrect Manner
If you open a Data Viewer immediately after the system starts up, the tree or the state of a Data
Viewer may not be displayed correctly due to high load of the system. In about 20 minutes after the
system startup, when a pop-up message (below) which prompts you to reconstruct a Data Viewer
appears, click [OK]. The Data Viewer will be reconstructed and the tree and the status will be
displayed correctly.
Floppy Disk Drive Name
After switching on and off the power of the CPU/PCI module (CPU/IO module), the floppy disk
drive name of [I/O Device] on Data Viewer may be different from the name that is recognized by
the OS.
(Example: drive name on Data Viewer: "A"
drive name recognized by the OS: "B")
Check the floppy disk drive name on Explorer.
Floppy Disk Drive Information
If you add or delete floppy disk drive connected with USB while the system is running, the drive
information under the [I/O Device] in the data viewer will be updated at the next system startup.
When the Displayed BIOS Information is Incorrect
Additional information of BIOS which is displayed by clicking [ft] - [CPU Module] - a CPU
module - [General] - [BIOS Information] on a Data Viewer or by clicking a CPU module and
clicking [BIOS Information] on Server Maintenance Utility may not be displayed correctly. In such
a case, display the BIOS information on a Data Viewer by clicking [ESMMIB] - [BIOS].
Ethernet Adapters You Do Not Use
If an Ethernet adapter is not used (not connected to cable), set it to "Disable" in [Network
Connections] from Control Panel. If an Ethernet adapter you are about to disable has dual LAN
settings (AFT function), remove the dual LAN settings before disable it.