Checking The Size Of A Loaded Original; Manually Setting The Scanning Size - Sharp DM-3551 Operation Manual

CHECKING THE SIZE OF A LOADED ORIGINAL

If the loaded original is a standard size*, the size will be detected (automatic original detection)
and displayed in the ORIGINAL key. Make sure that the size has been correctly detected. If
you have loaded a non-standard size original or wish to change the scanning size, you can
follow the steps below to manually set the original scanning size.
NOTE
*Standard sizes that can be detected are as follows:
5-1/2"x8-1/2", 8-1/2"x11", 8-1/2"x11"R, 8-1/2"x14", 11"x17". If a non-standard size original is loaded (including special sizes),
the closest standard size may be displayed, or the original size may not appear at all.

MANUALLY SETTING THE SCANNING SIZE

If you load an original that is not a standard size (such as an AB size), or if the size is not detected correctly, you must
touch the ORIGINAL key and set the original size manually. Perform the following steps after loading the document in
the automatic document feeder or on the document glass.
1
Touch the ORIGINAL key.
STANDARD
RESOLUTION
AUTO 8 X11 1 /
2
ORIGINAL
2
Touch the MANUAL key.
ORIGINAL SIZE
O MANUAL
SIDED 2-SIDED
OKLET TABLET
3
Touch the desired original size key.
SPEAKER REDIAL
ORIGINAL SIZE
OK
AUTO MANUAL
OK
5 X8 1 / 1 / 5 X8 R 1 / 1 / LONG SIZE
2 2 2 2
8 X11 1 / 8 X11R 1 / AB
2 2
1 / INCH
8 X14 11X17
2
NOTE
You can return to automatic detection by pressing the CA key.
If you loaded a long original
If you loaded a long (up to 31.5") original in the auto document feeder, touch the
LONG SIZE key in step 3 above.
NOTE
When a long original is loaded, you cannot use the automatic two-sided scanning function.
1-8
The sizes that can be
selected are displayed.
AUTO is no longer
highlighted. MANUAL and
the original size key you
touched are highlighted.
If you wish to select an AB size, touch the
AB INCH key and then touch the desired
original size key.
SPEAKER REDIAL
ORIGINAL SIZE
OK
AUTO MANUAL
OK
A5 B5R B4
A5R A4 A3
AB
B5 A4R INCH
4
Touch the outer OK key.
KER REDIAL
OK
L A4
OK
5
The selected size appears in the top half of the
ORIGINAL key.
STANDARD
RESOLUTION
A4
ORIGINAL
STANDARD
RESOLUTION
AUTO 8 X11 1 /
2
ORIGINAL
AB is highlighted and AB
size keys are displayed. To
return to the inch palette,
touch the AB INCH key
once again.
You will return to the initial
screen. (Pressing the inner
OK key in the step above
returns you to step 2.)
NU L
OK
LONG SIZE
AB
INCH