Stapling Position Quick Reference Guide For Duplex Output - Sharp DM-3551 Operation Manual

FINISHER

Stapling position quick reference guide for duplex output

The orientation of the copy paper, original, scanned original data, and binding position selection are all interrelated. The
table below shows these relationships.
Orientation of original or original data
Page 1
NOTES
Stapling can only be done when the offset tray has been selected.
If mixed paper sizes are selected for stapling jobs, stapling will be automatically canceled.
NOTE
Transparency film, labels , envelopes and postcards cannot be stapled.
5-16
Page 1 & Page 2
Page 2
Duplexed
Output result
One-position stapling Two-position stapling
One-position stapling
Two-position
stapling with top
binding cannot be
made.
One-position stapling Two-position stapling
One-position stapling
Two-position
stapling with left
binding cannot be
made.
One-position stapling Two-position stapling
One-position stapling
Two-position
stapling with right
binding cannot be
made.