Misfeed In The Finisher - Sharp DM-3551 Operation Manual

FINISHER

Misfeed in the finisher

When a misfeed occurs in the finisher, remove the misfed paper following the procedure below.
1
Remove the misfed paper from the output
area.
2
Open the finisher top cover.
Top cover
3
Remove the misfed paper.
4
Open the finisher compiler.
5-14
Be careful not to tear the
misfed paper during
removal.
Move the tab in the
direction of the arrow as
shown in the illustration to
open the top cover.
Be careful not to tear the
misfed paper during
removal.
After removing the paper,
press down on the top
cover to close it.
Release the latch to open
the finisher compiler.
5
Raise the paper guide and remove the
misfed paper.
Paper
guide
6
Close the finisher compiler.
Do not remove paper from
the stapler compiler.