Cautions On Laser - Sharp DM-3551 Operation Manual

CAUTIONS

Cautions on laser

Wave length
Pulse times
Output power
At the production line, the output power of the scanner unit is adjusted to 0.4
MILLIWATT PLUS 8 % and is maintained constant by the operation of the Automatic
Power Control (APC).
Caution
This product contains a low power laser device. To ensure safety do not remove any cover or attempt to gain
access to the inside of the product. Refer all servicing to qualified personnel.
For North America:
This Digital Equipment is rated Class 1 and complies with 21 CFR 1040.10 and 1040.11 of the
CDRH standards. This means that the equipment does not produce hazardous laser radiation. For
your safety, observe the precautions below.
Do not remove the cabinet, operation panel or any other covers.
The equipment's exterior covers contain several safety interlock switches. Do not bypass any
safety interlock by inserting wedges or other items into switch slots.
Caution
Use of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
0-4
+10 nm
785 nm
15 nm
North America: 35 cpm model: (4.1 µs ± 4.1 ns)/7 mm
45 cpm model: (5.7 µs ± 5.7 ns)/7 mm
Europe: 35 cpm model: (3.8 µs ± 3.8 ns)/7 mm
45 cpm model: (4.4 µs ± 4.4 ns)/7 mm
0.2 mW - 0.4 mW
SAFETY PRECAUTIONS