2.2
(YELLOW) BUTTON (SECOND FUNCTION)
This button is used to select the type of measurement (AC, DC) and the second
functions marked in yellow next to the relevant positions of the switch.
It can also be used to modify the default values in the configuration mode
(see § 3.4).
NOTE: This button is invalid in the MAX/MIN, HOLD and ΔREL modes.
Successive
presses on
2.3
BUTTON
Successive
presses on
NOTE: The backlighting is automatically disabled at the end of 2 minutes.
- Selects AC or DC. Depending on your
choice, the screen displays AC or DC
- Cycles through the continuity
diode test
modes and returns to the
continuity test
- Selects °C or °F as the temperature unit
- Enables/disables the backlighting of the
display
14
Function
, Ω and
Function