AEMC 5070 User Manual page 54

1.800.561.8187
Adjust the hours and minutes for the step in the same fashion used to select
If a Step is not used, select "---" as the duration. Next, adjust the sample
and adjust the sample rate.
Then, start the measurement by pressing the START/STOP button.
During the measurement, the following screens can be accessed by pressing the
DISPLAY button:
At the end of the measurement, the following are indicated:
resistance (with the highest test
voltage) and the initial resistance
(with the lowest test voltage).
The slope of the curve in ppm/V.
The capacitance.
Pressing the GRAPH button displays the resistance versus applied test voltage
curve.
54
www.
Megohmmeter Model 5070
information@itm.com
.com