Table of Contents
Advertisement
1.800.561.8187
DISPLAY CONTRAST
This function allows you to change the lightness and darkness of the display to
best suit the environment.
*The display is not legible above 130.
lighten or darken the display. The higher the number the lighter the display will
selection position.
ALARM SETTINGS
This function allows you to select a low insulation resistance value that will cause
an alarm symbol to appear on the display and will cause the buzzer to emit a
continuous tone when the measured insulation resistance falls below this value.
Voltage
500 V
1000 V
2500 V
5000 V
Adj. Voltage 1
Adj. Voltage 2
Adj. Voltage 3
screen displayed, you can adjust low limit resistance values for 500 V, 1000 V,
2500 V, 5000 V, or the three adjustable voltage positions.
the value at the blinking cursor position.
move the cursor again to the voltage selection part of the screen. You may now
To exit the alarm setting function, press the DISPLAY button. This will bring you
back to the top of the SET-UP menu.
14
www.
Range
0 to 255*
Range
Megohmmeter Model 5070
information@itm.com
.com
Advertisement
Table of Contents
