AEMC 5070 User Manual page 15

1.800.561.8187
ADJUSTABLE VOLTAGE 1, 2, 3
Measurement when the rotary switch is in the adjustable voltage position.
The values for this setting can be anywhere from 40 to 5100 volts adjustable in
10 or 100 volt increments.
Voltage
Adj. Voltage 1
Adj. Voltage 2
Adj. Voltage 3
Three adjustable settings are possible.
or decrement the value.
back to the parameter selection position.
This function lets you set a time from 1 minute to 49 hours and 59 minutes to run
an insulation resistance test.
The Model 5070 will automatically end the test at the end of the timed run.
selection position.
Data from a timed run test can be stored in the Model 5070 at an interval you
select. This storage interval can be as fast as once every 10 seconds to as slow
as once every 10 minutes.
Megohmmeter Model 5070
www.
Range
40 to 5100 V
(in steps of 10 V from 40 to 1000 V)
(in steps of 100 V from 1000 to 5100 V)
Range
00 to 49 : 01 to 59
Range
00 to 10 : 10 to 59
.com
15
information@itm.com