(Yellow) Button (Second Function); Button - AEMC 405 User Manual

Find Quality Products Online at:
2.2

(YELLOW) BUTTON (SECOND FUNCTION)

This button is used to select the type of measurement (AC, DC, AC+DC) and the
second functions marked in yellow next to the relevant positions of the switch.
It can also be used to modify the default values in the configuration mode (see §
3.4).
NOTE: This button is invalid in the MAX/MIN/PEAK, HOLD and ΔREL modes.
Successive
presses on
short
long (>2 sec)
2.3

BUTTON

Successive
presses on
NOTE: The backlighting is automatically disabled at the end of 2 minutes.
GlobalTestSupply
www.
Function
- Selects AC, DC or AC+DC. Depending on
your choice, the screen displays AC, DC or
AC+DC
- Cycles through the continuity
diode test modes and returns to the
continuity test
- Resets the measurement process for the
phase order indication function
- Displays the total 3-phase power of a
balanced system ( is displayed). Press
again to return to the display of the single-
phase power ( is off)
Function
- Enables/disables display backlighting
15
.com
, Ω and
sales@GlobalTestSupply.com