Setting The Voltage Selector Switch - Epson Powerspan User Manual

Setting the Voltage Selector Switch

Your system is powered by a 230 watt power supply. The
power supply voltage is controlled by a voltage selector switch
on the computer's back panel that may be set to 115 VAC or
VAC.
230
The computer is shipped with the voltage selector switch set to
115 VAC. This setting is appropriate for line source voltages
between 100 and 120 VAC. This is generally the appropriate
setting if you will use the computer in North America or Japan.
If you plan to operate the computer in the United Kingdom or
Europe, you will almost certainly need to reset the voltage
selector switch to 230 VAC. Line source voltages between 200
and 240 VAC are acceptable with the switch set to 230 VAC.
If you need to change the voltage selector switch setting, refer
to the illustration below.
1-4
Setting Up Your System
voltage selector switch