Installing The Cpu Card - Epson Powerspan User Manual

2. Continue sliding the bracket forward a couple of inches
until it stops; then pull the slotted end toward you and to
the left until the narrow tip of the bracket comes out of its
hole. Set it aside.
3. Carefully pull the CPU card straight out of its connectors
on the main system board. Do not rock the card from
side-to-side or you will damage the connectors. Be sure not
to touch any of the card's components or the gold
connectors; handle it only by the edges.
If you are going to replace the CPU chip, see the instructions
that came with the upgrade kit.
When you are ready to replace the CPU card, follow the steps
in the next section.

Installing the CPU Card

When you handle the card, hold it only by its edges; do not
touch any of its components or the gold connectors. Follow
these steps to replace the CPU card in your computer:
1. Align the CPU card with connectors J0730 and J0770 on the
main system board (shown on page 6-2). Then push the
card gently, but firmly, into the connectors.
6-4 Installing and Removing Options