Epson Powerspan User Manual page 126

9. If you installed a device that uses removable media, such as
a diskette drive, you need to remove the appropriate slot
cover from the computer's front panel. Remove the two
screws that secure the slot cover to the inside of the front
panel, as shown below. Then remove the slot cover and
store it in a safe place.
slot cover
10. Replace the front panel as described in Chapter 5.
Note
Once you have reassembled the computer, you need to run
the SETUP program or the EISA Configuration utility to
inform the system that a diskette drive or other device is
installed. For information, see Chapters 2 and 3.
and Removing Disk Drives
Installing
7-7