Replacing The External Side Cover - Epson Powerspan User Manual

Replacing the External Side Cover

Follow these steps to replace the external side cover:
1. Position the cover over the computer case so that the edge
with the handle protrudes about an inch beyond the back of
the computer. Align the tabs at the top and bottom of the
cover with the notches in the computer case, as shown
below.
2. Slide the cover toward the front of the system so that the
tabs engage in the notches.
3. Replace the two side cover retaining screws you removed
earlier.
4. If necessary, replace the padlock or cable lock on the system.
bottom notch and tab
Accessing Internal
tabs
Components 5-7