Epson Powerspan User Manual page 59

System board options ( Continued)
Option
Onboard
Mouse Control
Speaker
Control
CPU Speed
NumLock Boot
State
I/O Recovery
Time
Posted I/O
Writes
Settings
Enabled*
Disabled
Enabled*
Disabled
FAST*
SLOW
ON at Boot
OFF at Boot*
Standard
Enhanced*
Enabled *
Disabled
Running the EISA Configuration Utility
Description
Set to Enabled if you have
connected a mouse to the
built-in mouse port; set to
Disabled if you are not using a
mouse (frees hardware
interrupt lRQ12) or if you are
using a mouse controller
installed on an option card
Set to Enabled to turn on the
computer's built-in speaker;
set to Disabled to turn off the
speaker (cannot be turned on
by application software if
Disabled)
Select FAST to set the
computer's processor to
operate at its maximum
speed; select SLOW to set the
processor to operate at a
simulated 8 MHz speed to
accommodate old
application programs that
may require it
Select ON at Boot to enable
Num Lock mode whenever
you turn on or reset your
computer; select OFF at Boot
to disable it
Select Enhanced to set fast
I/O recovery times; set to
Standard if you have trouble
with an application program
or option card that is running
in Enhanced mode
Set to Enabled to improve
performance by posting I/O
writes to the EISA bus; set to
Disabled if any of your option
cards do not support this
feature
3-17