Epson Powerspan User Manual page 60

System board options (continued)
Option
Concurrent
Refresh
LCD
Scan FLASH
User Area
POST Memory
Test Prompt
BIOS Setup
Control
3-18 Running
Settings
Enabled*
Disabled
-
Enabled
Disabled*
Enabled *
Disabled
Enabled - Prompt for
setup entry *
Enabled - Suppress
setup prompt
Setup Disabled
the EISA Configuration Utility
Description
Set to Enabled to improve
performance by executing
concurrent CPU, cache, and
main memory refresh cycles;
set to Disabled if you have
trouble with application
programs while this option is
enabled
This option has no effect on
your system
Set to Enabled to allow the
BIOS to call any code you
have installed in the 8KB block
EA000h to EBFFFh (FLASH user
area) prior to booting the
computer; set to Disabled to
scan the block normally
Set to Enabled to display the
skip memory test prompt
when you turn on or reset your
computer; select Disabled to
prevent display of the prompt.
(you can still press the
spacebar to skip the test if you
disabled the prompt.) See
Chapter 2 for more
information.
Select Enabled - Prompt for
setup entry to display the
prompt to run the SETUP
program when you turn on or
reset the computer; select
Enabled - Suppress setup
prompt to prevent display of
the prompt; select Setup
Disabled to prevent entry into
the SETUP program until this
option is changed