Epson Powerspan User Manual page 52

Note
If you installed EISA option cards in your system, the
program first asks you to insert a diskette containing a
CFG file for the EISA card. Remove the Reference
diskette, insert the appropriate configuration diskette,
and press [Enter. Follow the instructions on the screen to
complete the installation and then go to the next step.
2. Select Step 1 and read the information displayed on your
screen about configuring your system. If you want to print
any of the screens to the printer connected to port LPT1,
press the @E' key.
3. Select Step 2 and follow the instructions on the screen to
add, remove, or move option cards in your configuration
and copy any necessary CFG files to your Reference
diskette. See the next section for more information.
4. Select Step 3 and follow the instructions on the screen to
view or edit the details of your system board and your
option cards. See "Defining the Configuration Settings"
below for more information.
5. Select Step 4 if you want to view or print the current
configuration and any switch or jumper settings you may
need to change. Follow the instructions on the screen.
6. When you finish configuring your system, select Step 5
to save the configuration in your computer's CMOS RAM
and reboot the system. You can also exit the program
without saving the configuration, if necessary. Follow the
instructions on the screen.
3-10 Running the EISA
Configuration
Utility