Epson Powerspan User Manual page 57

System board options (continued)
Option
COM2
Redirection
Video Type
Offboard
VGA/EGA
Video Adapter
Onboard
Video
Controller
Settings
Disabled
l
1200 Baud
2400 Baud
9600 Baud
VGA/EGA
l
CGA - 80 columns
CGA - 40 columns
MDA
Not Installed
No - Enable
Onboard Video
Controller via
Jumper*
Yes - Disable
Onboard Video
Controller via Jumper
Primary
l
Secondary
Running the EISA Configuration Utility
Description
Set to Disabled to prevent
redirection of the computer's
input and output to the serial
port assigned to COM2: set to
the speed the computer
should use to copy the
redirected input/output to the
serial port assigned to COM2
If you have installed a video
display adapter on an option
card, select the type of
adapter you installed; if you
are using the built-in video
controller, select VGA/EGA
Set to Yes if you have installed
a video display adapter on an
option card that contains a
BIOS at address C0000h; select
No if you have not installed a
video option card
Set to Primary if you are using
the built-in video controller as
your primary adapter; set to
Secondary if you are not using
your built-in controller. This
setting is ignored if jumper
E0290 is set to disable the
built-in VGA controller and
you set this option to Primary
3-15