Ethernet Interface; Hardware, Interface - MICRO-EPSILON capaNCDT 6228 Operating Instructions Manual

Ethernet Interface

6.
You will achieve especially high resolutions if you readout the measurements in digital form via the Ethernet
interface.
For that purpose, use the web interface or a special program. MICRO-EPSILON supports you by the driver
MEDAQLib, containing all commands for capaNCDT 62x8.
You can find the current driver routine including documents at:
www.micro-epsilon.com/download
www.micro-epsilon.com/download/software/MEDAQLib.zip
6.1
The data logging of all channels is synchronous.
For a connection with the capaNCDT 62x8 you will require a defined IP address of the network interface card
inside the PC. Go to Control Panel\Network Connections. Set up, if applicable, a new LAN connec-
tion. For more information, contact your network administrator.
Fig. 27 LAN connection of a PC
capaNCDT 6228 / 6238
Ethernet Interface

Hardware, Interface

Connect the capaNCDT 62x8 to an available Ethernet interface at the PC. Use a crossover cable.
Page 44