Table of Contents
Advertisement
Ethernet Interface
6.5.2
Fig. 30 First interactive web page after calling the IP address
Use the upper navigation bar to access additional features (e. g. Settings etc.).
All settings on the web page are applied immediately in the controller.
Parallel operation with web interface and Telnet commands is possible; the last setting applies.
The appearance of the web pages may vary depending on functions and peripherals. Each page contains
parameter descriptions and tips on completing the controller.
6.5.3
You can program the capaNCDT 62x8 at the same time in two different kinds:
- Using a web browser via the sensor web interface
- With ASCII command set and terminal program via Ethernet (Telnet)
capaNCDT 6228 / 6238
Access via Web Interface
DT6228
2279
Operating Menu, Set Controller Parameter
Page 69
Advertisement
Table of Contents
Need help?
Do you have a question about the capaNCDT 6228 and is the answer not in the manual?