Safety Conventions; Safety Recommendations; Service And Repairs; Potential Safety Hazards - ABB Endura ACA592-TC Operating Instructions Manual

Endura ACA592
Toroidal conductivity transmitter

1.11 Safety Conventions

Warning. Indicates a condition which, if not met, could cause serious personal injury and / or death.
Do not move beyond a warning until all conditions have been met.
If a warning sign appears on the instrument itself, refer to Precautionary Labels – product certification
and Electrical Safety – EN / IEC 61010-1 for an explanation.
Caution. Indicates a condition which, if not met, could cause minor or moderate personal injury and /
or damage to the equipment. Do not move beyond a caution until all conditions have been met.
Note. Indicates important information or instructions that should be considered before operating the
equipment.

1.12 Safety Recommendations

For safe operation, it is imperative that these service instructions be read before use and that the safety
recommendations mentioned herein be scrupulously respected. If danger warnings are not heeded to,
serious material or bodily injury could occur.

1.13 Service and Repairs

Other than the serviceable items listed in Section 11, page 84, none of the transmitter's components can
be serviced by the user. Only personnel from ABB or its approved representative(s) is (are) authorized to
attempt repairs to the system and only components formally approved by the manufacturer should be
used. Any attempt at repairing the instrument in contravention of these principles could cause damage to
the instrument and corporal injury to the person carrying out the repair. It renders the warranty null and void
and could compromise the correct working of the instrument and the electrical integrity or the CE
compliance of the instrument.
If you have any problems with installation, starting, or using the instrument please contact the company that
sold it to you. If this is not possible, or if the results of this approach are not satisfactory, please contact the
manufacturer's Customer Service.
Note. The transmitter uses a capacitive touch display. Ensure the glass cover is kept in a clean
condition to avoid contact problems caused by a dirty screen.

1.14 Potential Safety Hazards

The following potential safety hazards are associated with operating the system:

Electrical (line voltage)

Use in hazardous areas
10
1 Safety
OI/ACA592/TC–EN Rev. B