Conformance To Ul And Csa Standards; Conformance To Kc Certification; Conformance To Shipbuilding Standards - Omron NX Series Hardware User Manual

Regulations and Standards

Conformance to UL and CSA Standards

Some NX-series products comply with UL and CSA standards.
If you use a product that complies with UL or CSA standards and must apply those standards to your
machinery or devices, refer to the Instruction Sheet that is provided with the product. The Instruction
Sheet provides the application conditions for complying with the standards.

Conformance to KC Certification

When you use this product in South Korea, observe the following precautions.
This product meets the electromagnetic compatibility requirements for business use. There is a risk of
radio interference when this product is used in home.
Usage Conditions for KC Certification
Take the same measures as those described in Conformance to EU Directives on page 37. In addi-
tion, attach a clamp core to the port side of the EtherNet/IP cable.
The recommended clamp core is given below.
Manufacturer
TOKIN

Conformance to Shipbuilding Standards

This product complies with the following shipbuilding standards. Applicability to the shipbuilding stand-
ards is based on certain usage conditions. It may not be possible to use the product in some locations.
Contact your OMRON representative before attempting to use a Controller on a ship.
Usage Conditions for NK and LR Shipbuilding Standards
• This product must be installed within a control panel.
• Gaps in the door to the control panel must be completely filled or covered with gaskets or other ma-
terial.
• The following noise filter must be connected to the power supply line.
Noise Filter
Manufacturer
Cosel Co., Ltd. TAH-06-683
38
Recommended Clamp Core
Product
Clamp core
Model
Model
ESD-SR-250
NX-series NX102 CPU Unit Hardware User's Manual (W593)
Turns of cable
1 turn