Installing And Connecting Nx Units - Omron NX Series Hardware User Manual

5 Installation and Wiring
Markers
The marker attachment locations on the NX Units depend on the type of external connection termi-
nals. Refer to the user's manual for the NX Units that you will use for the marker attachment locations.
l Installation Method
Insert the protrusions on the markers into the marker attachment locations on the NX Units and ter-
minal blocks on NX Units.
Marker
l Commercially Available Markers
Commercially available markers are made of plastic and can be printed on with a special printer.
To use commercially available markers, purchase the following products.
Product name
Markers
Special marker printer
The markers made by OMRON cannot be printed on with commercially available special printers.
5-3-5

Installing and Connecting NX Units

This section describes how to mount NX Units to the CPU Unit and how to connect NX Units to each
other.
5-18
Marker attachment location
<Unit>
Manufactured by Phoenix Contact
UC1-TMF8
UM EN BLUEMARK X1
Marker attachment location
Marker
<Terminal block>
Model number
NX-series NX102 CPU Unit Hardware User's Manual (W593)
Manufactured by Weidmuller
DEK 5/8
PrintJet PRO