Sysmac Studio; Model Numbers; Connection - Omron NX Series Hardware User Manual

3-5

Sysmac Studio

The Sysmac Studio is a Support Software package that provides an integrated development environ-
ment to design, program, debug, and maintain NJ/NX-series Controllers.
This section describes the models and connecting methods of the Sysmac Studio.
3-5-1

Model Numbers

The model numbers of the Sysmac Studio are given in the following table. The model numbers are
different for the media and licenses.
Product

Sysmac Studio

Standard Edition
3-5-2

Connection

With an NX102 CPU Unit, you can connect the Sysmac Studio online in the following ways.
Configuration
l Connection with EtherNet/IP
•

1:1 Connection

Sysmac Studio
EtherNet/IP
•
A direct connection is made from the com-
puter that runs Sysmac Studio. You do not
need to specify the IP address or connec-
tion device.
•
You can make the connection whether or
not an Ethernet switch is used.
•
Support for Auto-MDI enables the use of
cross cables or straight cables if a direct
connection is made.
*1. This function is available only when you connect Sysmac Studio to the built-in EtherNet/IP port (PORT1).
NX-series NX102 CPU Unit Hardware User's Manual (W593)
Configuration software
Sysmac Studio
The following Support Software is also
included.
Network Configurator
CX-Integrator
CX-Protocol
CX-Designer
*1
Number of
Media user licens-
es
DVD ---
Licenses 1
3
10
•
1:N Connection
Sysmac Studio
EtherNet/IP
•
Directly specify the IP address of the remote device.
3 Configuration Units
Model
SYSMAC-SE200D
SYSMAC-SE201L
SYSMAC-SE203L
SYSMAC-SE210L
3-19
3