Versions; Checking Versions - Omron NX Series Hardware User Manual

Versions

Versions
Hardware revisions and unit versions are used to manage the hardware and software in NX-series
Units and EtherCAT slaves.
The hardware revision or unit version is updated each time there is a change in hardware or software
specifications. Even when two Units or EtherCAT slaves have the same model number, they will have
functional or performance differences if they have different hardware revisions or unit versions.

Checking Versions

You can check versions in the ID information indications on the product or with the Sysmac Studio.
Checking Unit Versions on ID Information Indications
The unit version is given on the ID information indication on the side of the product.
The ID information on an NX-series CPU Unit NX102-££00 is shown below.
ID Information Indication
Note The hardware revision is not displayed for the Unit that the hardware revision is in blank.
40
Unit version Hardware revision
Ver. . HW Rev.
NX-series NX102 CPU Unit Hardware User's Manual (W593)
Lot number Serial number
LOT No. DDMYY xxxx
PORT1
PORT2
MAC address